Bizerba CS 300 - Pr 209 Tare Function

Operating instructions CS 300 Programming
6.110.98.5.01.40 en 7 - 5
7
0 = Passive zeropoint monitoring (default)
1 = Active zeropoint monitoring
Example: Menu setting "1"
Press key <0> three times.
Press <T> key.
Press <0> key.
Press <T> key.
Press key <0> five times.
Press <T> key.
The digit starts flashing.
Press <0> key.
Press <T> key.
7.3.4 Pr 209 tare function
Taring by pressing key <T>.
Setting options:
3
00 = Tare function activated
01 = no tare function (standard)
10 = tare function activated, constant tare
(tare will be deleted manually)
Fig. 88: Pr 209 Standard
Example: Menu setting "01"
Selection of programming mode during display test
Press key <0> three times.
Press <T> key.
Select menu
1
Press <0> key.
Press <T> key.