EasyManua.ls Logo

Bizerba eS10 - User Manual

Bizerba eS10
103 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Compact scale / terminal eS10
Operating instructions
as of program version 1.09
38034911005 en

Table of Contents

Questions and Answers

  • P
    Patrick RoseAug 18, 2025
    Why does the weight value display constantly change on my Bizerba eS10 Scales?
    • K
      Kevin ChanAug 18, 2025
      If the weight value display on your Bizerba Scales is constantly changing, it could be due to several factors. First, check if the load platter is correctly positioned, clean, and free from any objects touching it. Ensure the scale is leveled and the surrounding environment is free from drafts or vibrations. You can also try switching the device off and on. If the issue persists, the parameter settings may need adjustment by Bizerba customer service.
  • J
    jamesdavisAug 20, 2025
    What to do if my Bizerba Scales are in overload range?
    • M
      Michael WilliamsAug 21, 2025
      If your Bizerba Scales show an overload error, it means the weighing range has been exceeded. Remove some of the objects from the load plate to reduce the weight. Make sure the scale is level. If the problem continues, switch the device off and then on again.
  • D
    Duane LongAug 23, 2025
    How to troubleshoot power issues with Bizerba eS10?
    • H
      Hannah ShannonAug 23, 2025
      If your Bizerba Scales are not turning on, first check the power cable to ensure it is properly connected. Then, press the standby/reset key.
  • K
    Kimberly KaiserAug 26, 2025
    Why is my Bizerba Scales displaying an incorrect weight?
    • D
      Deborah ClarkAug 26, 2025
      If your Bizerba Scales are displaying an incorrect weight, make sure the product is placed correctly on the scale and that there is no external contact affecting the measurement. Remove any external contact.
  • J
    Jason RobinsonAug 28, 2025
    What to do if Bizerba eS10 Scales are in underload below zero point?
    • J
      James BrownAug 28, 2025
      If your Bizerba Scales are showing an underload or a value below zero, ensure the load platter is correctly fitted and not stuck. Remove any objects touching the load platter or located beneath it. You might also need to set the scale to zero.
  • K
    katherine91Aug 30, 2025
    Why won't my Bizerba eS10 Scales printer print?
    • B
      brenda87Aug 30, 2025
      If the printer is not printing with your Bizerba Scales, the receipt or label paper might be incorrectly inserted. Make sure the paper is correctly inserted, paying attention to the coated side.
  • A
    Andrew GarciaSep 2, 2025
    How to fix CPU timeout error on Bizerba eS10 Scales?
    • T
      Timothy FrancisSep 2, 2025
      To resolve a CPU timeout error on your Bizerba Scales, switch the device off and then on again.
  • R
    Richard SmithSep 4, 2025
    What to do if the data in the metrologically approved data storage could not be read on Bizerba eS10?
    • L
      Laurie SmithSep 4, 2025
      If the data in the metrologically approved data storage could not be read on your Bizerba Scales, try switching the device off and on again.
  • M
    Matthew DaySep 7, 2025
    How to check connection to digital load receptor on Bizerba eS10?
    • C
      Christina SchaeferSep 7, 2025
      If the digital load receptor connection on your Bizerba Scales has been disconnected, check the cable connection of the load receptor.
  • R
    Richard FrancisSep 9, 2025
    How to resolve CPU authentication failure on Bizerba eS10 Scales?
    • J
      Joe LopezSep 10, 2025
      If the CPU authentication failed on your Bizerba Scales, try switching the device off and on again.

Summary

About These Instructions

Introduction and Basics

Covers content, safe-keeping, and target audience for the operating instructions.

Symbols and Warnings

Explains symbols used in the manual and how information is depicted.

About the Device

Device Overview and Identification

Details device types, scope of delivery, overall view, configuration, and identification plates.

Usage, Safety, and Verification

Covers intended use, protective marks, sight window, and verification procedures.

Data Storage, Operating Conditions, and Software

Explains metrologically approved data storage, operating conditions, and software details.

Optional Features, Warranty, and Disposal

Details optional load receptors, warranty terms, and disposal/environmental protection.

Safety Instructions

Requirements for Operating Personnel

Specifies qualifications and responsibilities for personnel operating the device.

Electrical Safety and Disconnects

Covers supply circuit disconnects, power plugs, and removable power cables.

System Hazards and Mains Supply

Addresses system-related hazards like electrical voltage and incorrect supply voltage.

Installation

Preparation and Requirements

Covers transport, storage, installation, and assembly requirements for the device.

Leveling and Electrical Connection

Details how to level the scale and check the electric connection.

Battery and Power Cable Options

Explains optional battery packs and removable power cables.

Operation

Display and Key Functions

Describes the display, operating field, and key functions for device operation.

Metrological Data and Logbook

Covers displaying metrological data and calling up the logbook.

Tendency Control and Data Storage

Details how to call up tendency control and metrologically approved data storage.

Weighing Modes and Battery Operation

Explains weighing operations, various modes, and battery pack usage.

Recording Operations

Covers item recording, adding, and total recording procedures.

PC;EDP and Printer Interface

PC;EDP Interface Details

Explains PC/EDP interface dialogs, data formats, and parameters.

Printer Interface Configuration

Details printer interface parameters and setup for data output.

IXNET Dialogs

Transport Protocol Frame

Describes the dialog frame and configuration of the transport protocol.

IXNET Interface Commands and Functions

Details commands, responses, and functions for the IXNET interface.

Ethernet Interface

Performance and Priority

Covers Ethernet interface performance, load capacity, and priority.

Interface Parameters and Configuration

Explains Ethernet interface parameters for IP addresses, subnet masks, and host names.

Service Menu

General and Scale Parameters

Covers general settings like country, language, and scale parameters.

Calibration and Seal Settings

Details the scale calibration menu and hardware seal settings.

Examples of Operating Procedures

Weighing, Recording, and Totaling Examples

Provides practical examples for weighing, recording, and totaling operations.

Counting, Recording, and Totaling Examples

Illustrates procedures for counting, recording, and totaling with data output.

Troubleshooting

Service Contact and Procedures

Information on contacting Bizerba service and available service concepts.

Fault Descriptions and Solutions

Lists common faults, their causes, and elimination steps.

Maintenance

Cleaning Procedures and Agents

Details how to clean the device, including permitted and prohibited agents.

Technical Data

Specifications Overview

Provides dimensions, housing details, display specifications, and temperature ranges.

Power, Protection, and Interfaces

Details power supply, protection class, and available interfaces.

Connections Details

Describes the pinout for parallel inputs and outputs and general connections.

Appendix

CE Declaration of Conformity

Formal declaration of the device's conformity with EC directives.

Bizerba eS10 Specifications

General IconGeneral
DisplayLCD
Legal for tradeYes
Readability1 g
ConnectivityRS232
Operating Temperature0°C to 40°C

Related product manuals