Operating instructions eS10 Operation
38034911005 en 33
5
5.9 Call up metrologically approved data storage
In the metrologically approved data storage ("alibi memory") you can enter a desired num-
ber with a maximum of 6 digits in a search mask and afterwards check the data record.
Key Display presentation Process description
Restart device.
Press and hold while middle segments are
being displayed.
The menu selection appears.
The total function is displayed.
Press key as often as needed until this dis-
play comes up.
Confirm service parameter selection with .
Press key as often as needed until this dis-
play comes up.
Confirm selection of metrologically approved da-
ta storage with .
Display of consecutive number of last entry in the
data storage.
Consecutive number of last entry selected.
Display: Scale number 01
Display: Gross weight
Display: Tare weight
With call up search mask for manual input or
with back to weighing mode.
Display of search mask.
The 100,000s decade is active.
To Next Page
Loading...
Need help?
General
