Bizerba eS10 - Battery Pack Operation (Optional)

Operation Operating instructions eS10
38 38034911005 en
5
Manual tolerance input
Display only if 50 = 3
Key Display presentation Process description
Tolerance control manual input
Current target value is displayed.
Change target value manual input with or
call up next parameter with .
Change value: Manual input of new target
weight.
Decade of 10 is selected.
Value input with or with .
Decade change with or .
Confirm new target value with
.
Current upper tolerance limit is displayed.
Change upper tolerance limit with or call up
next parameter with .
Change value: Manual input of new upper toler-
ance limit.
Decade of 10 is selected.
Confirm new upper tolerance limit with .
Current lower tolerance limit is displayed.
Change lower tolerance limit with or call up
next parameter with .
Change value: Same procedure as for upper tol-
erance limit. Confirm input with
.
Save setting with or cancel with .
5.11 Battery pack operation (optional)
The device can be optionally equipped with a battery pack for network-independent opera-
tion.
Operation with battery pack
If the battery is fully charged, the scale can work in battery mode for up to 20 hours. If not
fully charged, operating time is reduced.