Bizerba eS10 - Page 39

Operating instructions eS10 Operation
38034911005 en 37
5
Key Display presentation Process description
Current upper tolerance limit is displayed.
Change upper tolerance limit with or call up
next parameter with .
Current lower tolerance limit is displayed.
Change lower tolerance limit with or call up
next parameter with .
Save setting with or cancel with .
Call up % ± tolerance
Display only if 50 = 2
Key Display presentation Process description
% ± tolerance of target value is selected.
Current % deviation from target value is dis-
played.
Change % deviation with or call up next pa-
rameter with .
Change value: % table is selected.
Every time you press , the % deviation from
the target value changes: "±1.0", "±2.5", "±5.0",
"±7.5", "±10.0", "±1.0", …
Confirm new % deviation with .
Current target value is displayed.
Change target value weighed with or call up
next parameter with .
Change value: Place new target value on scale
and adopt with
.
Save setting with or cancel with .