Bizerba eS10 - Weighing Operation; Weight Display; Zero Setting of Scale; Net Weighing with Tare Balance

Operation Operating instructions eS10
40 38034911005 en
5
5.12 Weighing operation
5.12.1 Weight display
After switching the device on, the weight display appears.
Key Display presentation Process description
The current weight is continuously dis-
played.
Single division scale: The weight value is displayed in the entire weighing range in dis-
play steps of the same division.
5.12.2 Zero setting of scale
Key Display presentation Process description
Requirement: The scale is in no-motion
condition and within the zero setting
range of ±2% of the maximum weighing
range.
5.12.3 Net weighing with tare balance
Taring with weighed tare value.
Key Display presentation Process description
Requirements: The scale is in equilibri-
um. Weight value is within weighing
range.
If is assigned with the relevant function, net weighing with fixed tare value is also
possible, see page 44.