Bizerba CS 300 - Overview of programming

Programming Operating instructions CS 300
7 - 16 6.110.98.5.01.40 en
7
7.6 Overview of programming
Setting option
Display example
Menu See
page
Checkout dialog 00
12
Standard 06 Pr 201 7 - 2
Switching between
POS / scale display
on 1/4 VGA display
0 Switching after motion on scale Pr 204 7 - 3
1 Switch after approx. 2 sec.
Active zeropoint
monitoring
0 passive zeropoint monitoring Pr 206 7 - 4
1 active zero point monitoring
Tare function 00 Tare function enabled (auto de-
lete)
Pr 209 7 - 5
01 no tare function
10 Tare function enabled (manual-
ly delete)
0-LED with scanner 0 LED off with zero Pr 401 7 - 6
1 LED is not controlled
2 LED on with zero
Set display type 1 to 6 Pr 404 7 - 7
Fine resolution dis-
play
Pr 701 7 - 8
Display load cell
type
Pr 703 7 - 8
Logbook monitoring Pr 705 7 - 9