Bizerba VS12D-V User Manual

Machine and operating elements Operating instructions VS12D /C /-R /-V /-
V/R
5 - 4 6.083.98.5.10.10 en
5
5.1.3 Distance between slices during shingling
The distance between slices during shingling cannot be influenced depending on the se-
lected number of slices (see table, rounded values).
Number of slices Distance between slices
<Shingling lengthwise>
Distance between slices
<Shingling crosswise>
Selection (1-99 pos-
sible)
max. length 160 mm max. width 125 mm
5 40 mm 31 mm
6 32 mm 26 mm
8 23 mm 18 mm
10 18 mm 14 mm
12 15 mm 11 mm
15 11 mm 9 mm
17 10 mm 8 mm
24 7 mm 5 mm
33 5 mm 4 mm
41 4 mm 3 mm
54 3 mm 2 mm
Example: With program selection <Shingling lengthwise> and number of slices
"10" set, the 10 slices are deposited at a distance of 18 mm over a total length of
160 mm. Now we want to slice 10 slices with a slice distance of 10 mm:
Enter number of slices "17".
Distance between slices is 10 mm.
Start slicing.
After the 10th slice, press the <S> key.
10 slices are deposited on the depositing table with a distance of 10 mm
This setting remains in memory until exiting the depositing programs.
If the depositing program is saved, this program setting will remain in place until the next
program storage.
5.2
Selecting operating mode for VS12D
5.2.1 Manual operation
In manual operation, carriage drive and product feeding are operated by hand.

Bizerba VS12D-V Specifications

General

Brand	Bizerba
Model	VS12D-V
Category	Kitchen Appliances
Language	English