How to fix Black & Decker BCPC20 Pressure Washer that will not start?
If your Black & Decker Pressure Washer unit isn't starting, first ensure the battery pack is correctly installed. Next, check if the battery pack is fully charged. If the tool has overheated, allow it to cool down. Finally, if the brushes are worn out, have them replaced by an authorized BLACK+DECKER service center.
Why does my Black & Decker BCPC20 Pressure Washer shut off abruptly?
If your Black & Decker Pressure Washer shuts off suddenly, it could be due to the battery pack overheating. Allow the battery pack to cool down. Alternatively, the battery may be out of charge; in that case, place it on the charger.
What to do if my Black & Decker BCPC20 battery pack will not charge?
If the battery pack for your Black & Decker Pressure Washer isn't charging, make sure it's properly inserted into the charger until the LED illuminates. Also, verify that the charger is plugged into a working outlet. Finally, ensure the surrounding air temperature is between 40 degrees F (4,5°C) and 105 degrees F (+40,5°C).
General| Brand | Black & Decker |
|---|---|
| Model | BCPC20 |
| Category | Pressure Washer |
| Language | English |
To Next Page
