Why does the Black & Decker Drill battery pack not charge?
If the battery pack for your Black & Decker Drill won't charge, ensure the charger is properly plugged into a working outlet. Also, the surrounding air temperature might be too hot or too cold. Move the charger and battery pack to an area where the surrounding air temperature is above 40 degrees F (4.5ºC) or below 105 degrees F (40.5ºC).
General| Soft grip | Yes |
|---|---|
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Number of gears | 2 |
| Torque settings | 11 |
| Sound power level | 74 dB |
| Chuck capacity (max) | 10 mm |
| Chuck capacity (min) | 1 mm |
| Sound pressure level | 63 dB |
| Idle speed (1st gear) | 550 RPM |
| Drilling diameter in wood (max) | 25 mm |
| Maximum torque (hard applications) | 26 N⋅m |
| Maximum torque (soft applications) | 12.5 N⋅m |
| Vibration emission | 2.5 m/s² |
| Product color | Black, Orange |
| Number of batteries included | 1 pc(s) |
| Power source | Battery |
| Charging time | 180 min |
| Battery voltage | 10.8 V |
| Battery capacity | 1.5 Ah |
To Next Page
