Black & Decker CM2046S-LA - Page 8

8
4. Use HR and MIN buttons to set COLAR DESPUÉS time (while COLAR DESPUÉS
display is blinking)
5. After 3 seconds with no button pressed, COLAR DESPUÉS time is set.
6. When the COLAR DESPUÉS function is set, COLAR DESPUÉS is displayed (not
flashing), and unit will begin brewing at the COLAR DESPUÉS time.
If COLAR DESPUÉS function has been previously set:
The programmable COLAR DESPUES delay start allows you to set the 24-
hour timer to brew coffee at the selected time, day or night. To activate the
Auto Brew timer, follow these steps:
1. Press COLAR DESPUÉS button to check the COLAR DESPUÉS time. “COLAR
DESPUÉS” will flash once per second, and the clock will display the COLAR
DESPUÉS time for 3 seconds
2. After 3 seconds, clock reverts to current time, and “COLAR DESPUÉS” is
illuminated (no flashing)
Note: To override the COLAR DESPUÉS function, press the Power button to
cancel. Unit begins brewing immediately
Note: Even though COLAR DESPUÉS is disabled, the COLAR DESPUÉS time will
still be stored unless unit is unplugged