A
91
92
be easily inserted. It also will not grind grain, coffee
beans, or spices with a high oil content. Donot chop Ice
it will damagethe Bowl and dull the Knife Blade.
TOASSEMBLEFOODPROCESSOR
IMPORTANT:Be surethe FoodProcessor isoff and
unplugged before removing or inserting parts.
FoodProcessorBowl
To attach Bowl to Base,hold Bowl with Frontfacing you
(A).SetBowl into RoundWell and rotate until its Locking
Tabs drop down intothe Base.Twist the Bowl
counterclockwise asfar asit will go. Be sure both Lock-
ing Tabs drop into place. Usemarkings on the Push But-
ton Control Panel asa guide.
ReversibleSlice/ShredDisc
NOTE:TheReversible Discwill slice or shred depending
upon which side is facing upward.
Positionthe Bowl on the Base and place the DiscStem
onthe Center Post (B1).Graspthe Disc bythe Center Hub
with the desired side (slice or shred)facing upward.
Rotatethe Disc until it slides down into place.
IMPORTANT:Foryour protection, this unit has a system
that locks the Coverand Bowl onto the Basefor safe
usage. Donot attempt to operatethe unit withoutthe
Coverand Bowl locked correctly in place. An attempt to
do sowill turnontheIndicatorLightbut the unitwill not
operate.Ifthis happenschecktoensurethe coveris
completelyon.
C
FrenchFryDisc (MODELFP1011ONLY)
The French Fry Discis also usedwith the Disc Stem. This
Discmust bemounted with the cutting bladesfacing
upward, and is installed the sameway asthe Slice/Shred
Disc(C).
KnifeBlade
Position the Bowl onthe Base. Graspthe Blade byits
Center Huband slip the Blade down over the Center Post
ofthe Bowl. (D).
To Next Page
Loading...
Need help?
General
