Black Box KV9622A - 3.2.2 Connecting the Computers

Page 15
724-746-5500 | blackbox.com
KV9622A
Chapter 3: Installation
Monitor Monitor
EHN90024U cable
Speakers Microphone Keyboard Mouse
Figure3-2.KV9624AConsolekeyboard,mouse,
monitor, and audio connection.
NOTES: The monitor connected to the DVI-I port must be capable of
synchronizing with the computer’s video signal. If you are uncertain
about the monitor type, consult the monitor user’s manual.
3.2.2 Connecting the Computers
Usingtheall-in-oneDVIcable(EHN900024U-0006or-0010),connectacomput-
er to the ServSwitch. Connect the cable’s USB connectors to the computer’s USB
port.Connectthecable’sDVI-Iconnectortoyourcomputer’sDVI-Imonitorport
asshowninFigure3-3andFigure3-4.ConnecttheUSBandDVI-Iconnectorson
the other end of the cable to the ServSwitch. Follow the same procedure to con-
nect the other computers.