Need help?Do you have a question about the Black Box Freedom II Series and is the answer not in the manual?
General| Audio Support | Yes |
|---|---|
| USB Support | USB 2.0 |
| Power over Ethernet | No |
| MAC Address Table | Not applicable |
| Jumbo Frame Support | Not applicable |
| Power Supply | External power adapter |
| Certifications | CE, FCC |
| Product Type | KVM Switch |
| Special Features | DisplayPort or HDMI video connectivity (depending on the model), audio and USB 2.0 peripheral sharing, compact design, hotkey and front-panel push-button switching |
Details the key features of Freedom II units, including multiple screen support and switching options.
Instructions for connecting peripherals and systems to the Freedom II unit.
Instructions for connecting computer systems to the Freedom II unit.
Details on connecting power adapters for operation and redundancy.
Guide to setting up the Freedom II using the Zero Touch Switch Manager.
How to access and log into the switch manager via a web browser.
Displays unit status, power inputs, temperature, and MAC address.
Settings for hotkeys, switching modes, port options, and audio mixing.
Configuration of IP address, netmask, gateway, and DHCP settings.
Procedures for restoring the unit to its default factory settings.
Instructions for upgrading the unit's firmware.
Steps to define screen layouts and download them to the Freedom II unit.
Overview of methods to switch peripherals between computer channels.
To Next Page