34
1. 8 7 7. 8 7 7. 2 269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
4.3 MULTI-MONITOR GLIDE AND SWITCH CONFIGURATION
4.3.1 INSTALLING DRIVERS AND MULTI-MONITOR CONFIG APP
In order to use Multi-Monitor mode you will need to install a Multi-Monitor Glide and Switch driver (available for download from the
Black Box website. Go to the Freedom II product page and click on the 'Resources' tab) onto each PC that has multiple monitors
attached.
1. On each multiple monitor PC, run the downloaded file. After accepting the licence agreement you will be prompted to choose a
destination folder. Either accept the suggested location or change it, as necessary.
Note: The Install for all users option should be ticked if there are more than one user account on the PC and all need to use Glide
and Switch.
2. The options available during installation are as follows:
• Full Install, (this is recommended), or
• Optionstoinstallindividually:
• Configuration App.
This is the Glide and Switch application and needs to be installed only on the PC that will be used to set up the Freedom II
switch via the supplied flash upgrade cable and OPTIONS port.
• Visual C++ Runtime
The C++ runtime library is a windows component that is required by the multi-monitor driver in order to run its helper appli-
cations. It is pre-installed with Windows but is offered here as an option as you may want to keep an older version already
installed on your system, or you may already have a newer version in your copy of Windows.
• Drivers
Multi-Monitor Glide and Switch drivers that are required on each PC that will be using Multi-Monitor.
Choose the required components and click the Next > button.
3. Once the chosen components have been installed, click the Finish button.
Note: On the PC that will be used to set up the Freedom II switch, you can optionally tick ‘Click to run the Glide and Switch
Configuration Application’ in the lower left corner to immediately begin using Glide and Switch - see 4.3.2 Configuring multiple
monitors for details.
Note: On each PC that you installed the driver, a process called mumoapp.exe will remain running.
(WINDOWS ONLY)
To Next Page
Loading...
