724-746-5500 | blackbox.com
Page 10
Chapter 2: Overview
2. Overview
2.1 Introduction
Your Industrial Ethernet Extender is a state-of-the-art IEEE-compliant network solution designed for users who require
high-performance to eliminate bottlenecks and increase productivity.
To simplify installation, the Industrial Ethernet Extender is shipped ready for use.
2.2. Features
• Has (1) 10/100BASE-TX Ethernet port with an RJ-45 connector.
• Auto negotiates speed and duplex mode on the Ethernet port.
• Auto MDIX on Ethernet port.
• Complies with IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX standards.
• Has (1) Ethernet Extender port with an RJ-11 connector or terminal block.
• Ethernet Extender port auto-senses the speed.
• DIP switch configures Ethernet Extender Auto or Local mode, and turn OFF/ON Link Down relay.
• Status LEDs.
• Uses an external AC to DC power adapter (not included).
2.3 What’s Included
Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support at 724-
746-5500 or info@blackbox.com.
• Industrial Ethernet Extender
• A printed Quick Start Guide
NOTE: You will need two extenders to complete the application.
The full user manual/installation guide (the document you are reading) can be downloaded from the Black Box Web site.
To download from the Web site:
1. Go to www.blackbox.com
2. Enter the part number (LB323A) in the search box:
3. Click on the “Resources” tab on the product page, and select the document you wish to download.
To Next Page
Loading...
