24
SERVSWITCH DUO™
The ServSwitch Duo supports “Internet mice” that are compatible with the
Microsoft IntelliMouse. These are fitted with a wheel or other type of scrolling
control and sometimes have additional buttons. Examples are:
• Microsoft IntelliMouse
• Logitech Pilot Mouse+
• Logitech MouseMan+
• Genius NetMouse
• Genius NetMouse Pro
You can connect standard PS/2 mice and IntelliMouse compatible mice to
control ports A and B in any combination. You can configure your CPUs using
Microsoft PS/2 or IntelliMouse drivers in any combination as required.
IntelliMouse features are supported on both PS/2 and RS-232 CPU connections.
When you use PS/2 CPU connections, the ServSwitch Duo will automatically
configure itself to the type of mouse requested by the driver. If you are using
RS-232 CPU connections, you will need to send the [U][4] or [U][5] command to
enable the IntelliMouse features.
U1 Channels are mouse-switchable; the Switch reports “2-button mouse” to the
attached PCs (default)
U2 Channels are not mouse-switchable; the Switch reports “2-button mouse” to
the attached PCs
U3 Channels are not mouse-switchable; the Switch reports “3-button mouse” to
the attached PCs
U4 Channels are mouse-switchable; the Switch reports “IntelliMouse” to the
attached PCs
U5 Channels are not mouse-switchable; the Switch reports “IntelliMouse” to
the attached PCs
To Next Page
Loading...
Need help?
General