Black Box SW1040A User Manual

Switch between two networks
with this Layer 1 switch.
SW1040A is a basic latching A/B switch and
SW1041A is a basic latching A/B switch with RS-232 Ethernet.
CAT6 Remotely Controlled Layer 1 A/B Switch, Latching
SW1040A
SW1041A
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Customer
Support
Information

Black Box SW1040A Specifications

General

Brand	Black Box
Model	SW1040A
Category	Switch
Language	English

Summary

Product Specifications

Connectors Overview

Details the physical ports for SW1040A and SW1041A models, including A/B switch, control, and power.

Product Introduction

Control Interface Options

Explains manual, serial RS-232, and Ethernet control methods for the switch.

Configuration Settings

Installation Procedures

Connection and Setup Steps

Operation Modes

Manual Switching

Explains manual switching using front panel pushbuttons for network port selection.

Dry Contact Closure Switching

Serial RS-232 Switching (SW1041A)

Describes remote control via RS-232 serial commands for the SW1041A model.

Ethernet Network Setup

Initial Serial Configuration

Guides initial network setup using a serial terminal to configure IP, subnet, and gateway.

Network Parameter Configuration

Details setting IP address, subnet mask, gateway, and community names for network access.

Console Command Reference

Web Interface Access

Web Interface Command Console