34
SERVSWITCH DUO™
Examples of common hotkey commands (assuming the hotkeys are [Ctrl] and
[Alt]):
• To select channel 2:
Press and hold [Ctrl] and [Alt], press and release [2], release [Ctrl] and [Alt].
• To “tab through” channels:
Press and hold [Ctrl] and [Alt], press and release [Tab] (repeat as many times
as necessary), release [Ctrl] and [Alt].
• To select channel 12 on a 12-port or 16-port Switch:
Press and hold [Ctrl] and [Alt], press and release [1], press and release [2],
release [Ctrl] and [Alt].
• To select channel 5 on a subsidiary Switch connected to port 13 on a master Switch:
Press and hold [Ctrl] and [Alt], press and release [1], press and release [3],
press and release [0], press and release [5], release [Ctrl] and [Alt].
• To select channel 7 on an 8-port subsidiary Switch connected to port 4 on a 4-port master
Switch:
Press and hold [Ctrl] and [Alt], press and release [4], press and release [7],
release [Ctrl] and [Alt].
To Next Page
Loading...
