17
CHAPTER 2: Introduction
Panel Label Description
POWER (left) Main Power LED: Lights to indicate that the Matrix ServSwitch is
powered ON.
[Numbered] CPU Status LEDs: Numbered pairs of LEDs indicate the status of
the CPU connected to the corresponding port on the rear
panel:
Left/Red (Select)
Lights if the corresponding port is currently selected by either station.
Right/Green (CPU Power)
Lights if the device on the corresponding port is powered ON.
NOTE
The 2 x 4 and 2 x 8 chassis have 8 each of the Select
and CPU Power LED windows. The 2 x 16 chassis has
16 each of them. The extra LED windows in the
chassis of the 2 x 4 model are left empty.
User A User A Next-Port Button: Press this button to manually switch
User A’s shared monitor, keyboard, and mouse (the ones
attached to KVM 1) from the currently selected computer to the
next one in sequence.
User B User B Next-Port Button: Press this button to manually switch
User B’s shared monitor, keyboard, and mouse (the ones
attached to KVM 2) from the currently selected computer to the
next one in sequence.
NOTE
The sequence of accessible computers for any given
user will depend on the user’s assigned definition,
profile, and group; see Sections 4.5 through 4.7.
To Next Page
Loading...
Need help?
General