Black ATB - 4 Adjustments; Adjusting the Handlebar Position

4. Adjustments
4.1 Adjusting the Handlebar Position
a) Place the handlebar onto the handlebar stem, place the cover on and fix the 4
screws with an Allen Key, torque should not be less than 5Nm.
b) To align the handlebar, face your bike and hold the front wheel between your legs.
Turn the handlebar so it is perpendicular to the front wheel.
c) Tighten the two screws that fix the handlebar stem to the steerer tube. The torque should not be less than 8Nm.