Blackberry Curve 8310 Getting Started Guide

Install the BlackBerry Desktop Software
1. Verify that your BlackBerry® device is not connected to your computer.
2. Insert the BlackBerry® User Tools CD into the CD drive on your computer.
3. Click BlackBerry Desktop Software.
4. Complete the instructions on the screen until the Setup Type screen appears.
5. On the Setup Type screen, perform one of the following actions:
• If you do not want to use the BlackBerry® Desktop Software to synchronize
certificates between your device and your computer, select the Typical option.
Click Next.
• If you want to use the BlackBerry Desktop Software to synchronize certificates
between your device and your computer, select the Custom option. Click Next.
In the Certificate Synchronization drop-down list, click This feature, and all
subfeatures, will be installed on local hard drive.
6. Complete the instructions on the screen.
7. When the installation is complete, connect the smaller end of the USB cable to the
USB port on the side of your device.
8. Connect the larger end of the USB cable to the USB port on your computer.
If the BlackBerry® Desktop Manager does not open automatically, on the taskbar, click
Start > Programs > BlackBerry > Desktop Manager.
29

Blackberry Curve 8310 Specifications

General

Brand	Blackberry
Model	Curve 8310
Category	Cell Phone
Language	English