17
STEP 8
SAFETY INSPECTION
Before nishing installation, please inspect all the screws and nuts carefully to make
sure all of them tightened.
NOTICE
1. Inspect all the Nuts, Nut Caps and Pedals and re-tighten as needed regularly and
inspect the equipment periodically. Should you nd any defective parts, replace them
immediately. Don’t exercise until they are repaired well.
2. Pay more attention to normal wear on parts. As in the following gure, please
inspect the Leather Brake pad (24) to make sure that it is in good working condition
before exercise. If it is not, please replace it.
To Next Page
