18
STEP 5
ATTACHING THE WATER BOTTLE HOLDER
Secure the water bottle holder (17) in place of Main frame (1) with Cross screw (22) and Flat
washer (24), put the Water bottle (21) in the holder.
When you do not use the bike, use the L-shape pin (6) to x the fan wheel for safety.
e unit is equipped with wheels (96), which make it easier to move. e two wheels at the
front of the unit make it easier to place the unit in to any chosen position by lifting the rear
slightly. Store your unit in a dry place, preferably not subject to changes in temperature.
MOVEMENT AND STORAGE
To Next Page
