- 12 -
FIRST USE
WARNING!
The coffee maker is equipped with two microswitches for
functional safety. One microswitch is situated on the door A,
and the other microswitch is situated in the liquid drip tray
compartment 13.
The door A is provided with a safety micoswitch: when the
door is opened, the coffee maker automatically switches off
and does not work. Operation will be resumed when the door
is closed.
Before any other operation apply the anti-burn holder
to the steam nozzle (fig. 7).
• WATER LOADING
- Open the front door A (the coffee maker automatically
switches OFF).
- Pull the water tank undercarriage 15 forward.
- Rotate the water tank towards the front as shown in (fig. 8)
and remove it.
- Fill the water tank (fig. 9) with cold drinking water only, without
exceeding the maximum level. The tanks contains approx.
2.3 litres.
- Replace the tank in its compartment and bring the
undercarriage to the initial position.
- Close the door A.
NOTE! When the water goes below the minimum level, the
indicator light 6 on the front will go on.
WARNING!
Especially when using the coffee maker for the first time,
wash the water reservoir/tank with soapy water and rinse
thoroughly.
Fill the container with drinking water only, with a low
calcium content.
The coffee machine must be well maintained. You carry
out descaling maintenance regularly with a specialised
descaler for coffee machines.
fig.8
6
MAX
fig.9
fig.7
To Next Page
Loading...