- 18 -
• MAINTENANCE
If the appliance is not used for several days, the following
operations are recommended:
Empty the water container.
- Turn off the appliance and switch off the circuit breaker on
the general switchboard.
- Disconnect the plug from the socket.
- Remove the coffee grains contained in the coffee container
and actuate the grinder to empty the remaining coffee.
- Clean all tanks and accessories with water and soap.
- Dry every part of the appliance.
- Make sure that the filter-holder (K2) is empty and clean.
- When the appliance is operated after a long stop, we
recommend to load the hydraulic circuit with hot water, ,
make 2/3 coffee cups and throw them away in order to finish
the old coffee.
• CLEANING
All cleaning operations must be performed with hot parts at
room temperature.
How to clean the steam nozzle:
- Make sure that the steam nozzle is cold.
- After each use, clean the nozzle with a dampened cloth,
place it inside the grid and open the knob to free the
remaining liquid from the nozzle.(fig. 21).
Cleaning the filter and filter-holder:
- Using a tool or the other filter, separate the filter (K4/K5)
from the filter-holder (K2) (fig. 22)
- Clean with a water jet (tap) and dry.
- If necessary, clean the filter with a brush.
fig.21
fig.22
daily weekly
PA RT
PART NO.
9
K4,K5,K2
A
12
13
11
Cleaning the nozzle
Cleaning the filter and filter-
holder
Cleaning the appliance
externally
Cleaning the grid
Cleaning the liquid drip tray
Cleaning the water tank
right after
use
To Next Page
Loading...