Blanco BCM6X - INSTALLATION INSIDE A CABINET; ELECTRICAL CONNECTION

To Next Page

To Previous Page

- 9 -

• INSTALLATION INSIDE A CABINET

- Build in the coffee maker in a column (fig. 2) or

cabinet (fig. 3).

- Open the front door A of the appliance as

shown in fig. 4

- Permanently fit the coffee maker to the cabinet

with the six screws B supplied with the

appliance (fig. 5).

NOTE! According to the

support type, we

recommend to pre-drill a

hole on the wood to avoid

cracking.

WARNING!

Make sure that the coffee maker is stable inside the

cabinet.

• ELECTRICAL CONNECTION

WARNING!

Before connecting the appliance to the electricity

supply: check that the household electricity supply is

compatible with the data contained on the plate applied

inside on top left as shown in (fig. 6).

Use the appliance only if the power cord is not damaged.

fig.4

fig.6

fig.5