Blanco BCM6X - HOW TO MAKE SINGLE-DOSE COFFEE

- 14 -
• HOW TO MAKE SINGLE-DOSE COFFEE
NOTE! if it is not possible to follow the sequence below, refer
to the "TROUBLESHOOTING" section.
- Insert the spring (K3), if not inserted already , in the filter-
holder (K2). (fig. 12).
This operation must not be repeated again, except in case
of spring breakage.
- Insert the single filter (K5) in the filter-holder (K2). fig. 13
- To start grinding the coffee,beans bring the filter-holder (K2)
with the empty filter close to the ground coffee dispenser
C, press once the button D for single-dose coffee quantity
(fig. 14).
Grinding is automatically set for a single dose.
- Press coffee evenly, with the coffee presser and apply
pressure (K6) (fig. 15).
- Clean the filter border.
- Insert the filter-holder (K1) in the dispenser by aligning
guides in the grooves and rotating in the attachment until
it is firmly tightened (fig. 16)
- Place the cup under the nozzles.
C
D
K2
fig.14
fig.13
K5
K2
fig.12
K3
K2
fig.15
K6
K2
fig.16