Operating Instructions 1-7D
Safety instructions
Personnel being trained or made acquainted with the equipment may
only be deployed on the machine under constant supervision of an
experienced person!
Work on electrical equipment or operating materials may only be
undertaken by a skilled electrician or by trained persons under
the guidance and supervision of a skilled electrician as well as
in accordance with the electrical engineering regulations.
2.4 Safety precautions applicable to different operating
conditions
Ban any method of working that impairs safety!
Only operate the machine when all safety devices and related
safety equipment, e.g. detachable safety devices, emergency
stops and suction devices are present and operational!
Check the machine visually for any damage and defects at least
once a day!
In the event of operational malfunctions the machine must be shut
down immediately and secured, and the fault must be rectified!
Secure the work area around the machine in public areas
providing a safety distance of at least 2 m from the machine.
Before switching on the machine make sure that no-one can be
endangered when the machine starts up!
Do not switch of or remove the exhaust and ventilation devices when
the machine is running!
All persons in the proximity of the machine must wear safety
glasses with lateral protection as well as safety shoes. The
operator is obliged to wear close-fitting protective clothing.
6
To Next Page
Loading...
