1-7D Operating Instructions
General
3.9 Abrasive media
In order to operate the ISPC Blastrac/EBE machine 1-7D you need
hardened, spherical abrasive. The machine 1-7D has been especially
designed to be operated with ISPC Blastrac/EBE abrasive.
The ISPC Blastrac/EBE abrasive is of very high quality and owns the
rebouncing ability required for the efficient use of model 1-7D. The
selection of the abrasive is very important since this is the material to
carry out the surface treatment.
Fig. 3.8
Fill in abrasive here!
9
To Next Page
Loading...
