Operating Instructions 1-7D
General
Selection of abrasive
Media No. 2:
Applications:
creates fine profiles, e.g. on vacuum concrete and non-glazed
tiles
removes thin layers of paint
Is often used when the surface is only subsequently sealed.
Media No. 3:
Applications:
creates a fine to medium texture on concrete
removes glazing from tiles prior to subsequently coating with
antiskid floor sealings
removes old impregnations and coatings about 1 mm thick
Media No. 4:
Standard abrasive, suitable for about 50-60 % of all applications.
Creates a medium profile on concrete. Fulfils the same purpose as
Media No. 3 when a higher speed of the machine is required, e.g. on
asphalt, in order to keep the thermal load low.
Applications:
removes laitance from new concrete
roughening of smooth concrete or natural stone
removes coatings with a thickness of 1-3 mm and cleaning of
steel surfaces
10
To Next Page
Loading...
