1-7D Operating Instructions
General
The effectiveness of the 1-7D depends on the rebound effect which
ensures that the abrasive can be re-used.
Please take into account that the use of incorrect abrasive increases
wear.
Our service engineers have the experience to select the appropriate
abrasive for the individual cases of application.
Please consult our local ISPC Blastrac/EBE customer service
department if you have any questions about the selection of the best
abrasive for your blast cleaning work.
ISPC Blastrac/EBE Media No. 2 - S00002
ISPC Blastrac/EBE Media No. 3 - S00003
ISPC Blastrac/EBE Media No. 4 - S00004
3.10 Care and maintenance
Special attendance and regular maintenance of the machine and its
parts are imperative for functioning and safety.
In order to prevent unnecessary downtimes it is recommended to
keep original spare and wear parts on stock as listed in the
maintenance box.
A list of contents of the maintenance box is provided in Chapter 10 to
enable the above-mentioned work to be carried out quickly.
All persons in the proximity of the machine in operation must wear
safety glasses with lateral protection and safety shoes. The
machine operator must wear close-fitting protective clothing.
11
To Next Page
