Operating Instructions 1-7D
Transport
4.1 General notes
Before the machine is used for the first time, ISPC Blastrac/EBE
authorised dealers offer a course to familiarise maintenance and
operating personnel with all elements of the machine. We are not
liable for damage caused by incorrect use of the machine by
personnel not trained by ISPC Blastrac/EBE.
4.2 Transport
When transporting the machine with hoisting equipment like a crane
or a lift, check the total weight permitted. Only use appropriate,
allowed and qualified hoisting equipment. Please look in Chapter 1 to
find the weight of the machine, or see the serial plate on the machine.
Remove the abrasive from the machine before it is transported. By
turning the machine handle the total height of the machine can be
decreased. The weight and dimensions of the machine are shown
in Chapter 1 "Technical data“.
The machine is to be transported after being separated into:
Machine (1-7D)
Filter unit (option)
General accessories
2
To Next Page
