Operating Instructions 1-7D
Maintenance
7.1 Recommendations
Prior to any repair works on the machine and its drives,
secure the machine against unintentional switching-on. Put
the machine to its safety off position.
Failures due to inadequate or incorrect maintenance may generate
very high repair costs and long standstill periods of the machine.
Regular maintenance is therefore imperative.
Operational safety and service life of the machine depend, among
other things, on proper maintenance.
The following table shows recommendations about time, inspection
and maintenance for the normal use of the machine.
The time indications are based on uninterrupted operation. When the
indicated number of working hours is not achieved during the
corresponding period, the period can be extended. However a full
overhaul must be carried out at least once a year.
Due to different working conditions it cannot be foreseen how
frequently inspections for wear checkings, inspection, maintenance
and repair works ought to be carried out. Prepare a suitable
inspection schedule considering your own working conditions.
Our specialists will be happy to assist you with more advice.
The subsupplier’s operating and maintenance instructions
should also be followed during service and maintenance.
This applies especially to the instructions for electric
components.
2
To Next Page
