Operating Instructions BMP-E165
Section 5 – Preparation and
Starting
April 2006
©Blastrac April 2006
26
5.3 Stopping/Switching Off
a) Lift the scarifier drum from the surface by tipping the machine back
slightly.
b) Press the Off button to remove power from the scarifier.
c) Turn the dust collector to the Off position.
d) If the BMP-E165 scarifier is to be switched off for a long period of time
cover the scarifier with a plastic sheet or tarp.
Make sure that all rotating parts have come to a complete
standstill and that all electrical power has been cut off or
disconnected before starting any inspection or maintenance work.
For further details concerning the “Maintenance Mode” see
Section 1.7.
To Next Page
Loading...
