Blastrac BMP-E165 - Measure to be Taken Before and After Storage

Operating Instructions BMP-E165
Section 6 – Operation February 2006
©Blastrac February 2006
31
6.6 Measure to be Taken Before and After Storage
All safety issues, instruction and cautions contained with this manual
should be complied with at all time. See Section 1 “Safety
Precautions”.
Before Storing:
1. Switch the machine off. See Section 5.3 “Stopping/Switching Off”.
2. Protect electric motors against moisture, heat, dust and impact.
3. Clean the machine and cover it with a plastic sheet or tarp.
After Storage:
1. Uncover machine and move the machine to an open area.
2. Clean the machine if necessary and perform all necessary regular
maintenance. See Section 7 “Maintenance).
3. For starting the machine see Section 5 “Preparation/Starting”.