Operating Instructions BMP-E165
Section 1 - Safety Precautions April 2006
© Blastrac April 2006
3
1.1 Warnings and Symbols (cont’d)
Information requiring advice or input from Blastrac.
Details of important information in this Instruction Manual.
Indication of necessary regular or scheduled checks pertaining to
safety, maintenance, and/or operation efficiency.
Troubleshooting tips and suggestions
Special information concerning the economic use of the machine
1.2 Statutory Safety Considerations
In addition to these Manual instructions and cautions, all
statutory and other binding (law) accident prevention regulations
such as OSHA, state and/or local entity articles should be a part
of operator training. This type of obligation may govern, i.e.
handling of hazardous materials or wearing personal safety
equipment. Some of these are listed in the remainder of this
Section 1.2 “Statutory Safety Considerations”.
Safety shoes are required. Observe all applicable local, state and
federal safety regulations. Wear OSHA-approved foot protection.
Eye protection is required. Observe all applicable local, state and
federal safety regulations. Wear OSHA-approved safety glasses
with side shields.
To Next Page
Loading...
