Operating Instructions BMP-E165
Section 8 - Electrical April 2006
©Blastrac April 2006
40
8.1 Circuit Diagrams
To ensure operator and personnel safety, electrical power should
be completely removed or disconnected from the machine. Set the
machine into the “Maintenance Mode”. See Section 1.7
“Maintenance Mode”.
Work on the machine’s electrical equipment must only be carried
out by a qualified electrician or by trained personnel under the
guidance and supervision of a qualified electrician.
Order electrical items by referring to the circuit diagrams or by
contacting you Blastrac representative.
To Next Page
Loading...
