01_LONDON470 DAB BT_de.indd 1 31.05.17 15:58
Selecting an ensemble
You can directly select ensembles that you have
received once already (for this to work, the ensem-
ble must be receivable).
y press the
/ button
7
to change
to the previous/next ensemble.
rst available service in the ensemble is
played.
Note:
With activated PTY function, the next service
with the currently selected programme type
is set (see the section "DAB-PTY" in this chap-
ter).
Ensemble seek tuning
nd new ensembles using seek tuning.
Press the / button
7
for approx. 2 sec-
onds to start the search for an ensemble.
The seek tuning stops if an ensemble is being
rst available service in the en-
semble is played.
Selecting a service
After you have tuned into an ensemble, you can
select a service from the ensemble.
y press the
/ button
7
to change
to the previous/next service.
DAB mode
List selection
Services or ensembles, which have previously
been received, can be selected directly in lists
without interrupting the ongoing playback (for
this purpose, the services/ensembles must be
receivable).
Press the SRC button
?
for approx. 2 sec-
onds to call up the list selection.
The
ashes on the display. In addi-
tion, the icon (service) or (ensemble)
appears.
Notes:
• You can exit the list selection at any time by
pressing the SRC button
?
.
• With activated fast browsing, instead of
the arrow buttons
7
, you can use the
volume control
4
button
3
rming list entries
(see chapter "CD/MP3/WMA/iPod mode",
section "Fast browsing").
Press the
button
7
to display the list of all
received ensembles.
The display shows the current ensemble.
Press the / button
7
or hold the button
erent ensemble.
Press the
7
to display the services
of the selected ensemble.
rst service of the ensemble is shown on
the display.
Note:
Pressing the
button
7
returns you to the
list of ensembles.
Press the / button
7
once or several
times or hold the button pressed to select a
erent service.
Press the button
7
to play back the ser-
vice.
The selected service is being played. You are
exiting the list selection.
Saving a service or calling up a saved
service
Select the desired DAB memory bank.
If necessary, set the desired service.
Press the station button 1 - 5
=
for approx.
2 seconds to store the current service under
the button.
- or -
y press the station button 1 - 5
=
to call
up the stored service.
8
ENGLISH
Scanning services
You can use the scan function to play all the receiv-
y.
Press the MENU button
2
for approx. 2 sec-
onds to start scanning.
To Next Page
Loading...
Need help?
General
