01_LONDON470 DAB BT_de.indd 1 31.05.17 15:58
HANDSFREE VOL
Adjusting the minimum volume for telephone
calls. Settings: 1 – 50.
Press the rotary control
7
to change the
setting.
7
to set the volume.
Press the rotary control
7
rm the
setting.
Note:
During the phone call, you can change the
volume directly by means of the volume con-
trol
4
.
BEEP (button beep)
.
Settings: ON, OFF.
Note:
rma-
tion beep sounds even if the OFF setting is
selected.
Press the rotary control
7
to change the
setting.
Turn the rotary control
7
to change be-
tween the settings.
Press the rotary control
7
rm the
setting.
Making settings in the "CLOCK" menu
PERM CLOCK
.
Settings: ON, OFF.
Press the rotary control
7
to change the
setting.
Turn the rotary control
7
to change be-
tween the settings.
Press the rotary control
7
rm the
setting.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 15 seconds af-
ter the button is pressed last, the time is displayed
again.
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
Press the rotary control
7
to change the
setting.
Turn the rotary control
7
to change be-
tween the settings.
Press the rotary control
7
rm the
setting.
SET
Setting the time.
Press the rotary control
7
to change the
setting.
Turn the rotary control
7
clockwise to set
the hours.
Turn the rotary control
7
counter-clockwise
to set the minutes.
Press the rotary control
7
rm the
time set.
Note:
When you set the time in 12-hour mode
(HOUR MODE 12), an "AM" is displayed before
the time for the time before noon or a "PM" for
the time after noon.
RDS CLOCK (automatic time setting)
(only for reception area EUROPE)
Switching automatic clock setting with clock data
. Settings: ON, OFF.
Note:
The time set with the clock data may not be
correct, even if an RDS station is being re-
ceived.
Press the rotary control
7
to change the
setting.
Turn the rotary control
7
to change be-
tween the settings.
Press the rotary control
7
rm the
setting.
User settings
34
ENGLISH
To Next Page
Loading...
Need help?
General
