17
EN
CLEAN THE MAIN BRUSH
The main brush is a consumable item and should be cleaned at least once
a week. It is recommended to replace the main brush every 6-12 months to
ensure the cleaning eect.
1 Reverse the robot, press the snap on the main brush cover, and remove
the main brush cover and the main brush.
NOTE Be careful when reversing the robot to prevent damage to the lidar laser.
2 Cut o the hair twisted around on the main brush with the cleaning
knife, and then clean the main brush with the cleaning brush with the
other end of the cleaning knife.
3 Reinstall the main brush and the main brush cover.
Press and fasten the snap.
MAINTENANCE
Main brush
cover
Main brush
To Next Page
Loading...
Need help?
General
