Product Operation
Water Tank and Mopping Cloth Usage
1. Sticking mopping cloth
To stick mopping cloth on the bottom of water tank as shown in fig 1, make sure the sticking
side and mopping cloth are facing the appropriate sides, and then to stick the mopping cloth on
its sticking side.
2. Fill water tank with water
Take out rubber plug of water tank, fill it with water, and then put back the rubber plug tightly on its
position in case of water leakage.
3. Fit water tank on the robot
Turnover the robot, fix the water tank on the robot bottom, make sure its bolts are firmly, pressed
into the fixing slots.
To Next Page
Loading...
