EasyManua.ls Logo

Blaupunkt BREMEN MP76 - Setting the Display Illumination Colour

Blaupunkt BREMEN MP76
376 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Setting the display illumination
colour
When setting the display illumination, you
can choose one of four preset colours or
you can mix a colour yourself from the RGB
spectrum (red-green-blue) or you can se-
lect a colour during a colour scan.
Selecting a preset colour
Four different colours are already stored in
the device. "Ocean" (blue), "Amber", "Sun-
set" (red-orange) and "Nature" (green) are
available. Select a colour that best suits
your vehicle interior.
Press the MENU button 9.
Press the softkey 5 with the display
label "DISPLAY".
Press the softkey 5 with the display
label "COLOR".
Press the softkey 5 with the display
label of the desired colour.
Press the OK joystick 8 or the MENU
button 9 to exit the menu.
The settings are saved.
Mixing a colour for the display
illumination
To customise the display illumination to suit
your taste, you can mix a colour yourself
using the three primary colours red, green
and blue.
Press the MENU button 9.
Press the softkey 5 with the display
label "DISPLAY".
Press the softkey 5 with the display
label "COLOR".
Press the softkey 5 with the display
label "USER".
The following menu allows you to defi ne
the components of the three colours
red, green and blue. For this purpose,
repeatedly press the corresponding
softkey 5 until the colour displayed
corresponds to your taste.
Press the OK joystick 8 or the MENU
button 9 to exit the menu.
The settings are saved.
Selecting a display illumination colour
during a colour scan
Press the MENU button 9.
Press the softkey 5 with the display
label "DISPLAY".
Press the softkey 5 with the display
label "COLOR".
Press the softkey 5 with the display
label "COL-SCAN".
The device starts changing the display illu-
mination colour.
If you want to select one of the colours,
press the softkey 5
with the display
label "SAVE".
If you want to return to the previous
menu without changing the colour,
press the softkey with the display label
"BREAK".
Press the OK joystick 8 or the MENU
button 9 to exit the menu.
The settings are saved.
Display
01BremenMP76US_gb.indd 1401BremenMP76US_gb.indd 14 7/28/06 11:28:25 AM7/28/06 11:28:25 AM

Table of Contents

Related product manuals