Blaupunkt BREMEN MP76 - Optimising Radio Reception

22
Radio mode
Activating PTY
To use the PTY function,
press the TUNER button = in radio
mode.
The display shows the radio function
menu.
Press the NEXT button 4.
Press the softkey 5 with the display
label "PROG TYP".
If PTY is activated, the display shows the
current programme type. PTY is illuminat-
ed on the display. The programme types are
shown next to the softkeys 5.
Deactivating PTY
To deactivate the PTY function,
press the softkey 5 with the display
label "PTY OFF" while the programme
types are displayed.
Selecting a programme type and
starting seek tuning
The PTY menu has several pages on which
the known programme types are displayed.
To scroll through the individual pages of the
PTY menu,
press the NEXT button 4 until the de-
sired programme type is displayed next
to one of the softkeys.
Press the softkey 5 with the desired
programme type.
Move the joystick 8 up or right or
down or left to start the seek tuning.
The radio will then tune into the next
receivable station that it fi nds that corre-
sponds to your selected programme type.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
If the tuner does not fi nd a station that cor-
responds to the selected programme type,
you will hear a beep and "NO PTY" appears
briefl y in the display. The radio will then re-
tune to the station that it received last.
If you want to return to the display of the
programme types,
call up the second page of the ra-
dio function menu again and press
the softkey 5 with the display label
"PROG TYP".
Optimising radio reception
Treble reduction feature during
interference (HiCut)
The HiCut function causes a reduction of
the interferences during poor radio recep-
tion. If interference occurs, the system au-
tomatically reduces the treble thus reduc-
ing the interference level.
Adjusting HiCut
press the TUNER button = in radio
mode.
The display shows the fi rst page of the radio
function menu.
Press the NEXT button 4.
Press the softkey 5 with the display
label "HIGH CUT" repeatedly until the
desired setting appears.
"HICUT 0" means that no automatic reduc-
tion of the treble and interference level will
be made; "HICUT 2" means that a maximum
reduction will be made.
Press the OK joystick 8 or the TUNER
button = to exit the menu.
The settings are saved.
쏅
쏅
쏅
쏅
쏅
01BremenMP76US_gb.indd 2201BremenMP76US_gb.indd 22 7/28/06 11:28:26 AM7/28/06 11:28:26 AM