BR460 22.05.19 17:00
AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
9
BR460 22.05.19 17:00
1010
Press the DIS button to toggle between the displays:
Changing to MP3/WMA/iPod mode
Press the SRC button repeatedly until the desired audio source is dis-
played:
• "SD(HC)": Inserted memory card
• "USB FRONT" or "USB REAR": USB data carrier connected to
the front or rear.
• "IPOD FRONT / IPHONE FRONT" or "IPOD REAR / IPHONE REAR":
Connected iPod / iPhone at the front or rear side
• "AUX": Connected external audio source.
ectly registerd.
First, pull the protective cap of the USB port : to the front until it
moves out of the port and fold it to the right to connect a data car-
rier to the USB port at the front of the device.
Note:
iPod mode
Connecting/removing a USB data carrier
Connecting a USB data carrier
• A list of compatible iPod and iPhone models is located at the end of
these instructions
tion of other iPod and iPhone models.
Note:
• If the connected USB data carrier cannot be seen, “USB ERROR” is
• The time required for reading in the data depends on the design
and size of the USB data carrier.
Note:
• You can connect USB data carriers to the USB port at the front of
the device as well as the rear USB port.
• If an iPhone and iPod are connected at the same time, the devices
are charged via the USB ports. If two iPhones are connected at the
same time, charging is not possible.
You can connect numerous iPod and iPhone models to the car sound sys-
tem via the USB port in the front of the device and the USB port at the
rear and control the audio playback from the car sound system.
Display Meaning
ABCDEF Station name
RADIO TEXT
Radio text, only if
available
P1 FM1 89.90
Memory location/
memory bank/frequency
P1 FM1 08:40
Memory location/
memory bank/time
Use a suitable adapter cable to connect your iPod or iPhone with the
USB port of the car sound system.
Connect the USB data carrier.
Turn on the car sound system. If the USB data carrier is initially sele-
cted
To Next Page
Loading...
