Blaupunkt BREMEN SQR 46 DAB - User Settings and Factory Defaults; Scan Time, SWC, and Version Info; Factory Reset and Settings

BR460 22.05.19 17:00
AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
28
BR460 22.05.19 17:00
2929
User settings | Factory settings
Press the rotary contr
g.
Press the rotary control to change the setting.
Turn the rotary control clockwise to set the hours.
Turn the rotary control counter-clockwise to set the minutes.
SCAN TIME
Setting the scan time in seconds. Settings: 4/8/12/16/60
seconds.
SWC(Steering Wheel Conguration)
guring the buttons of a connected steering wheel control.
Press the rotary control to open the menu.
Turn the rotary control to change between the functions.
Press the rotary control to select a function.
Press the corresponding button on the steering wheel control for approx.
1 second to program the button with the selected function.
VERSION
Displaying the current software version of the radio.
Press the rotary control to open the menu.
Turn the rotary control to display the version number of the current
software.
NORMSET
Restoring the original factory settings of the car sound system.
Press the rotary control and the display shows "PLEASE CONFIRM".
Press the rotary contr
Factory settings
Important factory settings in the user menu:
Menu item Factory setting
TUNER AREA
EUROPE
HICUT 1
OFF
OFF
RDS ON
REGIONAL
TRAFFICINFO
SENSITIVITY HI
PTY OFF
TRAFFIC VOL 20
BEEP ON
SCAN TIME 8 SEC
DIMMER MANUAL
HOUR MODE 24
CLOCK SET 00:00
In the user menu, you can restore the original factory settings of the car
sound system (see the chapter "User settings", section "Making settings in
the "VARIOUS" menu", menu item "NORMSET").