BR460 22.05.19 17:00
AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
5
BR460 22.05.19 17:00
6
6
DAB mode
List selection
Press the button < to display the list of all received ensembles.
The display shows the current ensemble.
Press the button < to returns you to the list of ensembles.
Press the button > to display the services of the selected ensemble.
rvice of the ensemble is shown on the display.
Press the button > to play back the service.
The selected service is being played. You are exiting the list selection.
Select the desired DAB memory bank.
If necessary, set the desired service.
Press the MENU button for approx.2 seconds to start scanning.
During the scanning, "SCAN" and the current service name are inter-
mittently shown on the display.
MENU button to continue listening to the service
that is currently being scanned.
Press the station button 1-5 for approx. 2 seconds to store the current
service under the button
-or-
Press the button △/▽
ensemble.
Press the button
△/▽ once or several times or hold the button
pressed to select
Note:
Saving a service or calling up a saved service
Scanning services
Refreshing services received
Selecting an ensemble
You can directly select ensembles that you have received once already
(for this to work, the ensemble must be receivable).
y press the △/▽ button to change to the previous/next en-
semble.
rst available service in the ensemble is played.
Note:
With activated PTY function, long press the
△/▽ button to seach
the PTY programme type.
Ensemble seek tuning
nd new ensembles using seek tuning.
In DAB mode, seek starts with long press button / .
Long press DAB+ butto enter to List selection.
Selecting a service
After you have tuned into an ensemble, you can select a service from
the ensemble.
Services or ensembles, which have previously been received, can be
selected directly in lists without interrupting the ongoing playback (for
this purpose, the services/ensembles must be receivable).
To update the received service, read the section "Making settings in the "DAB
TUNER" menu", menu item "SERVICE SCAN" in the chapter "User settings".
To Next Page
Loading...
