AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
12
BR460 22.05.19 17:00
1313
Bluetooth® menu
d all the functions for pairing, connecting an
managing Bluetooth® devices.
Calling the Bluetooth® menu
MENU button to open the user menu.
Turn the rotary control until the "BLUETOOTH" menu item is selected.
Press the rotary control to open the Bluetooth® menu.
Turn the rotary control until the desired menu item is selected.
Perform the setting (see the following sections).
MENUbutton to exit the menu.
MP3/WMA/iPod mode | Bluetooth®
Searching by track names (not in iPod mode)
nd a
Press the button for approx. 2 seconds to start the search function.1
Notes:
• You
of tracks found.
• You can exit the search function at any
button.
1
Turn the rotary control to select a character for the respective position.
y press the rotary control to go to the next position.
y press the rotary control to start the playback.
Press the rotary control for approx. 2 seconds to start the search. All
If necessary, turn the rotary control to select a track.
Bluetooth®
You can connect the car sound system via Bluetooth with other Bluetooth
ready devices, such as cell phones or MP3 players.This allowsyou to use the
car sound system with its integrated microphone as hand-free system for
connected cell phones and control the audio output of other Bluetooth
devices and play them back via loudspeakers of the car sound system (Blue-
tooth streaming).
If a navigation app is installed on a cell phone connected with the car sound
system,you can play back the announcements of the navigation app simul-
taneously with one of the internal audio sources of the car sound system(e.g.
radio). In addition,you can adjust the volume levels of both audio sources to
each other.For further details, please read the sections “Activating/deactivting
combined playback” and “Adjusting volume” in the chapter “Additional func-
tions in the Bluetooth menu”.
Bluetooth technology is wireless is connection of short range. For this reason,
Bluetooth devices must be located near the car sound system (in the vehicle)
to establish and maintain a connection. To establish a Bluetooth connection,
pair the devices, a Bluetooth connection is subsequently established auto-
is within range. If the connection is interrupted,e.g. because you moved the
cell phone outside the range, the connection is automatically re-established
as soon as you are back within range.
You can connect 2 Bluetooth devices with the car sound system at the same
time(Twin Connect). Two cell phone can be connected at the same time , but
only one treaming device. If you connect a new device with car sound system,
the connection to a currently connected devices may automatically beinter-
devices paired, and you can quickly and easily connect any of these devices
with the car sound system again.
Note:
You can also connect an external microphone for hand-free calling
(see the chapter “Installation instruction”).
To Next Page
Loading...
