BR460 22.05.19 17:00
AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
Bluetooth®
Press the rotary control again. You can now enter the PIN:
Turn the rotary control to select a digit for the respective position.
Press the rotary control
to go to the next position.
Managing paired devices
In the Bluetooth® menu, you can manage the paired Bluetooth® devices
(cell phones and streaming devices such as MP3 player).
In the device lists for cell phones and streaming devices, the Bluetooth®
names of the paired devices are displayed. You can do the following:
• Disconnecting the connection to the currently connected Bluetooth®
device
• Establishing a connection to one of the paired Bluetooth® devices
• Unpairing Bluetooth® devices
• Select master telephone (for Twin Connect)
In the Bluetooth® menu, select the menu item "PHONE LIST" or "STREAM-
ING LIST".
Press the rotary control to open the menu ce on the list
is displayed.
Note:
ayed.
Turn the rotary contr ETE ALL"
option. You have the following options to connect the displayed device:
press the button
- or -
Press the rotary control to open the menu.
Select the "CONNECT" menu item.
Note:
The "CONNECT" menu item is shown only if the device is not connected.
As soon as the device is connected
displayed and you are returned to the device list.
Note:
If no connection can be established,
ows
"CONNECT FAILED". If the device is already connected, the display
ows "CONNECT EXIST".
To disconnect the connection to the displayed device,
press the button
- or -
Press the rotary control to open the menu.
Select the "DISCONNECT" menu item.
Note:
The "DISCONNECT" menu item is shown only if the device is connected
y shows "DISCONNECTED" and you are returned to
the device list.
Note:
If the device was not connected, the display
y shows "NO CON-
NECTION".
To unpair the displayed device,
press the button for approx. 2 seconds.
- or -
Press the rotary control to open the menu.
Select the "DELETE" menu item.
Press the rotary contr ows "DELETED" and
you are returned to the device list.
Note:
If a telephone is unpaired, the numbers stored for this telephone and
a phone book transferred from this cell phone are automatically
deleted.
To Next Page
Loading...
