Starting SCAN
Press and hold down the MENU button
> for longer than two seconds.
Scanning begins. "SCAN" and the station
name or the frequency appear intermittent-
ly on the display.
Cancelling the SCAN and continuing to
listen to a station
Press the MENU button >.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
(SCAN TIME)
Press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "SCAN TIME" appears on the dis-
play.
Press the button
2 to open the sub-
menu.
"SCAN" and the currently set value are dis-
played.
Set the desired scan time using the
or
button 2.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
Note:
The adjusted scan time also applies to
scan processes in MP3/WMA mode.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Press and hold down one of the station
buttons 1 - 5 8 for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve sta-
tions offering the strongest reception in the
region (only FM). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
Press and hold down the BND•TS but-
ton 5 for longer than two seconds.
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.
Listening to stored stations
Select the memory bank or waveband.
Press the station button 1 - 5 8 of the
desired station.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time from 5 to 30 seconds in the
menu (in increments of 5 seconds).
쏅
쏅
쏅
쏅
54
Radio mode
02_Brisb_VictoriaSD48_gb.indd 5402_Brisb_VictoriaSD48_gb.indd 54 23.11.2007 16:13:37 Uhr23.11.2007 16:13:37 Uhr
To Next Page
Loading...
